Bluetooth headsets have changed the way we listen to phone conversations, podcasts, and music. But, annoying problems like audio cutting off or sporadic sound are not unusual. You are not alone if you have ever been listening to your favorite song or conversing on the phone only to have the audio suddenly cut off. Various factors, including interference, software bugs, or hardware problems, might cause this frequent issue.
This post will look at the most typical reasons for audio cutting out on Bluetooth headphones and offer doable fixes to address them. We will also look at some professional advice to stop these problems from occurring in the future.
What Causes Audio to Cut Out on Bluetooth Headphones?
Many things could make sound on Bluetooth headphones cut out. Knowing these elements will enable you to identify problems and locate the appropriate fix.
1. Interference with Bluetooth Signals
Bluetooth headphones use a wireless connection to send music from your device. Any signal interference can make the sound cut out. Several origins might contribute to this interference, including:
- Other Bluetooth devices: Several devices running on the same frequency can conflict with one another.
- Routers: Same band as Bluetooth, the 2.4 GHz frequency range is also used by routers. Signal disturbances can result from heavy Wi-Fi traffic or a neighboring router.
- Microwave ovens: These devices can also cause interference on the same frequency range.
2. Low Battery Level
A low battery on your Bluetooth headphones could cause subpar performance and audio dropouts. Though you should always check the charge level, especially if you use them for extended periods, most headphones automatically alert you when the battery is low.
3. Bad Bluetooth Range
Usually about 30 feet (10 meters), Bluetooth has a restricted range for most devices. The signal strength could decline if you are traveling too far from your linked device or if barriers or furniture are between the two.
4. Problems with Bluetooth Pairing
Occasionally, the problem could be caused by incorrect pairing or a connection issue between your headphones and the gadget. Your headphones can cut out unexpectedly if they are not properly matched with your tablet, laptop, or phone.
5. Glitches in Software and Firmware
Software controls both the headphones and the linked device to guarantee a seamless connection. Software bugs, obsolete firmware, or other flaws could cause unanticipated audio loss.
6. Audio Source or Headphones Damaged
Physical damage to your Bluetooth headphones, such as a broken internal cable or faulty speaker, can cause sound problems. Likewise, the issue can be with the audio source device (smartphone, laptop, etc.) if it has a Bluetooth or audio output problem.
How to Repair Audio Cutting Out on Bluetooth Headphones
Having discussed the key reasons, let us now explore several feasible ways to address this aggravating issue.
1. Minimize Interference
You might try the following to reduce Bluetooth signal interference:
- Switch off other Bluetooth devices: Remove unwanted Bluetooth devices possibly creating interference.
- Change your router’s channel: Most routers let you cycle through various channels. Choose a less crowded channel to minimize Bluetooth signal interference.
- Move away from microwaves: If at all feasible, keep your Bluetooth headphones and gadget away from microwaves since they can create major interference.
2. Power Your Headphones
Ensure your Bluetooth headphones are completely charged. Should your headphones be low on battery, charge them for at least 15 minutes and see whether the issue continues. To prevent these problems, it’s wise to start routinely charging them.
3. Increase Bluetooth Range
Should you be utilizing your Bluetooth headphones at their maximum range, strive to remain closer to your associated device. Make sure there are no physical obstacles separating the two devices. Should your device allow it, you might also wish to utilize repeaters or Bluetooth range extenders to strengthen the connection.
4. Re-pair Your Headphones Bluetooth
Should your Bluetooth headphones not connect properly, you may attempt the following actions:
- Forget the device: On the linked device, open your Bluetooth settings and “forget” or “unpair” the headphones.
- Turn your device back on: This can fix small software bugs.
- Re-pair: Connect your device to your Bluetooth headphones by putting them in pairing mode.
5. Update Software and Firmware
Make sure your linked device and Bluetooth headphones both have the most recent software upgrades. To correct problems, increase performance, and guarantee compatibility with more recent devices, manufacturers often publish firmware upgrades. Look for firmware updates on the app or website of the manufacturer.
6. Look for hardware problems next.
Should none of the aforementioned remedies work, it could be time to look for physical harm. Look for any obvious wear or damage on the headphones, like broken ear cups, frayed wires, or missing components. Should you believe a hardware problem, call the manufacturer or go to a repair shop.
Preventive Advice to Stop Audio Cutting Out
Once you fix the problem, think about using these preventive methods to prevent future audio dropouts:
- Maintain Bluetooth Headphones Current: Check for firmware upgrades frequently to guarantee your headphones work best.
- Keep Your Surroundings Clean: Don’t put your Bluetooth device in a location likely to interfere, such near microwave ovens or routers.
- Store your Bluetooth headphones in a safe location while not in use to avoid physical harm.
- Charge your headphones regularly: Especially if you use them often, develop a habit of charging your Bluetooth headphones after each usage.
READ ABOUT:iPad Stand with Headphone Holder: The Ideal Organizational and Convenient Tool
Commonly Asked Questions
1. What causes my Bluetooth headphones to continually cut out?
Interference, low battery, bad Bluetooth range, or connection problems could cause your Bluetooth headphones to stop out. Try getting closer to your device, charging your headphones, and lowering interference from other devices.
2. How can I prevent Bluetooth audio from dropping out?
Make sure your headphones are completely charged, keep within Bluetooth range, upgrade your device’s software, and reduce signal interference from other devices to prevent audio cutting out.
3. Does Bluetooth interference lead to audio dropouts?
Certainly, the signal can be disturbed by interference from other Bluetooth devices, Wi-Fi networks, or even microwave ovens, which would result in audio dropouts.
4. How far does Bluetooth usually reach?
Usually around 30 feet (10 meters), the Bluetooth range could change depending on the quality of the Bluetooth technology in use. Remaining inside this range will help to avoid audio dropouts.
5. How do I upgrade the firmware on my Bluetooth headphones?
Look for firmware updates on the manufacturer’s website or mobile app. Download and install the most recent updates for your Bluetooth headphones by following the given directions.
Final Thoughts
Though many problems may be fixed with some basic troubleshooting, audio loss on Bluetooth headphones can be annoying. Restoring your audio experience starts with knowing the source of the problem whether it be interference, battery issues, or software bugs. Following the recommendations in this post will help you to reduce interruptions and have continuous sound.